Plain bearing genoa cars, sliders and spinnaker pole slides, plus stand up blocks
A popular range of genoa cars and sliders designed to run on 32mm (11/4") 'T' track. All are manufactured from high quality marine grade aluminium and finished with our unique 'Spectro' grey anodised finish for added protection.
All cars and sliders featured on these pages have moulded nylon inserts to ensure free, smooth running under load and prevent damage to finish or potential corrosion.
All genoa cars in this range are available in a heavy-duty version for larger craft or for larger load applications.
- 'Spectro' grey anodised finish
- Stainless steel plunger stops with positive action
- Moulded nylon slide inserts ensure free running
- Large, easy-grip plunger knobs
- Heavy-duty genoa car options.
32mm 'T' section track
For use with all sliders featured on this page. Drilled for fastenings and plunger stops. 'Spectro' grey anodised and supplied in metric lengths.
Specifications & dimensions
|Plunger hole centres||50mm|
Designed for use with the genoa cars shown in this range, these strong foot blocks have a three-bolt fixing and can be stacked to achieve doubles (see note below). 'Spectro' grey finish. Precision turned Ertalyte sheaves run on large diameter centre bearing to give low friction performance under high loads.
Important note – foot blocks:
Fastenings of the minimum diameter suggested should be used to gain full load capacity. Ensure that suitable mounting pads are provided underdeck. Stacking blocks to achieve doubles will severely reduce working loads quoted.
|Sheave Width mm||Rope
|Foot block - 50mm||82 995||50||15||12||1000||500||79||3 x M6||114|
|Foot block - 65mm||82 996||65||18||16||1600||800||100||2 x M6 / 1 x M8||211|
|Foot block - 85mm||82 997||85||21||18||3000||1500||132||2 x M8 / 1 x M10||427|