- D0550 Clutch
- Fuel Whistle
- Ball-bearing Complete Traveller System
- The Line Tamer
- Backstay Tensioner Block
- The Barton Cap
- The Barton Jacket
- "The Clamseal" A fast glueless repair for inflatables
- Shroud Cleat with Eye
 |
D0550 CLUTCH |
|
The Barton D0550 clutch is an all-new design for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, ‘Spectro’ anodised for high wear resistance and long life. |
contact your nearest Barton distributor 
|
FUEL WHISTLE |
|
The Fuel Whistle™ is a unique device that can help prevent accidental fuel spillage when re-fuelling boats. Available in the USA, the Fuel Whistle will be introduced to the European market by the recently appointed sole European distributor, Barton Marine. Created to make the re-fuelling process easier and more efficient, the Fuel Whistle lets the boat owner know when to stop re-fuelling by making a ‘whistling’ sound throughout re-fuelling, as air is displaced out of the breather pipe. To inform the boat owner that the tank is approaching full, the sound changes to a ‘warble’ before stopping when the tank is full. |
contact your nearest Barton distributor
|
BALL BEARING COMPLETE TRAVELLER SYSTEMS |
Two sizes are available for yachts up to 11m. |
 |
contact your nearest Barton distributor
|
THE LINE TAMER |
A new rope handling divice designed to keep the cockpit free from unused lines and halyards. |
 |
 |
contact your nearest Barton distributor
|
BACKSTAY TENSIONER BLOCK |
| Suitable for use on split or twin backstays, just attach block system to lower clevis pin. Available for 2 sizes of backstay wire 5mm and 10mm. |
|
|
 |
| Up to 5mm Dia backstay wire Part number 91020 | Up to 10mm Dia backstay wire Part number 91040 |
contact your nearest Barton distributor
|
THE BARTON CAP |
|
Fully adjustable Navy blue peaked cap Part number 99510 |
contact your nearest Barton distributor
|
THE BARTON JACKET |
 |
This stylish waterproof fleece lines XM jacket in Navy blue with Barton logo's on both sleaves and across the back of the Jacket |
contact your nearest Barton distributor
|
"THE CLAMSEAL" A FAST GLUELESS REPAIR FOR INFLATABLES |
  PART NO 60001 Winner of the National Marine Manufactures Association Product Innovation Award !! |
The instant repair for all makes of Rib's, inflatables and liferafts. The patented 'ClamSeal' is a compact safety device, which can be quickly inserted into any tear in a tube or fabric floor up to 90mm [3.5 inches]. Hand tighten the nut is all that is needed before reinflating the tube for an instant repair above or below the waterline. Giving you ample time before a permanent repair can be carried out. |
   |
contact your nearest Barton distributor
|
SHROUD CLEAT WITH EYE |
| These handy cleats simply clamp onto wires without causing damage. Two versions are available, one a plain cleat for flag halliards etc. and one with a generous opening that will accept halliard shakles for stowage purposes. |   |
|||||||||||
|
|
|||