Boomstrut
You will find
many reasons to appreciate the new Barton Boomstrut. No more
topping lift hassles, no adjustments and no hang ups. Gain improved
boat performance with less weight and windage aloft.
- MAINTENANCE
FREE, DURABLE DESIGN ELIMINATES FRICTION AND SLIDING PARTS
- PATENTED
FLEXING SPRING PROVIDES FAST RESPONSE AND A NEAR CONSTANT FORCE
FOR VANG EFFICIENCY
- EASY INSTALLATION
INDEPENDENT OF EXISTING KICKING STRAP, NO NEED TO REPLACE EXISTING
HARDWARE
- SIMPLE TO
FOLLOW FITTING INSTRUCTIONS AND ALL FASTENINGS INCLUDED
- MAST FITTING
CAN USE THE LUFF GROOVE TO ELIMINATE DRILLING THE MAST
- FIVE SIZES
- LIGHTWEIGHT & MAINTENANCE
FREE
The light weight,
low profile design features two coated flexible fibreglass rods
which provide the force to support the boom. Pulling the boom down
causes the Boomstrut to flex upwards, releasing straightens
the rods thereby lifting the boom.
Each Boomstrut is supplied with comprehensive and easy to follow fitting instructions. All fastenings required are included.
The boom fitting is contoured to fit both round and flat booms
and the mast fitting can slide in most luff grooves to avoid
drilling.
For ease of installation and rigging, the Boomstrut mounts independently inside the existing kicking strap tackle. There is no requirement to replace existing hardware, just fit the Boomstrut and remove the topping lift.
The Boomstrut is carefully designed and constructed to eliminate sharp edges,
minimise parts and provide ease of installation. All parts are made
from high grade stainless steel and aluminium 'Spectro' grey anodised
for good looks and durability.
|
|
Five
sizes
for yachts to 12m / 40ft LOA |
|

|