 |
Size
1 blocks SWL 350kgs:
Sheave Dia: 30mm
Max Rope Dia: 8mm |
 |
Size
2 blocks SWL 370kgs:
Sheave Dia:
35mm
Max Rope Dia: 8mm |
| |
|
|
|
 |
Size
3 blocks SWL 385kgs:
Sheave Dia: 45mm
Max rope Dia: 10mm |
 |
Size
4 blocks SWL 630kgs:
Sheave Dia: 58mm
Max Rope Dia: 12mm |
| |
|
|
|
 |
Size
5 blocks SWL 750kgs:
Sheave Dia: 54mm
Max Rope Dia: 12mm |
 |
Size
6 blocks SWL 1000kgs:
Sheave Dia: 60mm
Max Rope Dia: 12mm |
| |
|
|
|
 |
Size
7 blocks SWL 1250kgs:
Sheave Dia: 70mm
Max rope Dia: 14mm |
 |
Wire
rope blocks:
Sheave Dia from 35mm
Wire from 3mm to 5mm |
| |
|
|
|
 |
Stainless steel blocks
3 sizes from 6mm - 10mm max rope dia.
SWL up to 400kgs |
 |
High Load blocks & Foot Blocks:
Sheave Dia: 50mm
Max rope Dia: 18mm |
| |
|
|
|

|
Snatch blocks:
SWL up to 1385kgs
Max Rope Dia up to 16mm |
 |
DO 550 Clutches
An all new design for cruising and racing yachts, offering a holding power of up to 550Kgs. |
| |
|
|
|
 |
Inspection covers
Including Screw, Push Fit and 'T' Lock type |
 |
Organisers and Clutches
Clutches suitable for line up to 10mm |
| |
|
|
|
 |
Ball-Bearing Complete Traveller System
2 sizes for yachts up to 10m |
 |
Sail
handling
Lazy Jack Kits, Mast Steps, Slab Reefing Kits, etc. |
| |
|
|
|
 |
Ball-Bearing Mainsheet & Genoa Car Systems
Three sizes for yachts to 15m / 50ft loa. |
 |
Genoa
Cars & Sliders for 20mm 'T' Track
Suitable for larger dinghies, Dayboats and light cruiser/races. |
| |
|
|
|
 |
Ball-Bearing Mainsheet & Genoa Car Tracks
Three sizes for yachts to 15m / 50ft loa. |
 |
Genoa Cars & Sliders for 25mm 'T' Track
With moulded slide inserts to ensure free running under load. |
| |
|
|
|
 |
Mainsheet Travellers & Tracks for yachts up to 7.3m (24ft) loa.
Stainless Steel Captive Bearing Wheel Race.
|
 |
Genoa
Cars & Sliders for 32mm 'T' Track
With moulded slide inserts to ensure free running under load. |
| |
|
|
|
 |
Mainsheet Travellers & Tracks for yachts up to 10.5m (35ft) loa.
Stainless Steel Captive Bearing Wheel Race. |
 |
Special
cleats
Including: Sliding, Clamp On, Shroud and Stanchion cleats |
| |
|
|
|
 |
Mainsheet Travellers & Tracks for yachts up to 15m (50ft) loa.
Stainless Steel Captive Bearing Wheel Race. |
 |
'K'
Cam cleats
With max line Dia up to 14mm
Holding Power up to 260kgs |
| |
|
|
|
 |
Winches
and winchers
Nautilus Winches, single speed, 8:1, two speed 16:1 and 23:1. Winchers to convert standard winches to Self Tailing. |
 |
Winch handles & accessories
Including Aluminium handles, Floating handles, Handle pockets & holders. |
| |
|
|
|
 |
General chandlery
Including: Clevis Pins, Safety Rings, Pad Eyes |
 |
Tiller
extensions & furling gear
Tiller Extensions from 600mm to 1200mm
Furling Gears for sail area up to 100 sq ft |
| |
|
|
|
 |
Boomstrut
Boom Support suitable for Yachts from 5m to 12m. |
 |
Dinghy & dayboat fittings
Including: Fairleads, drain Bungs, Dinghy Track, Rudder and Transom Fittings. |
| |
|
|
|
 |
Cleats, thimbles & fairleads
Including: Open, Tubular, Aluminium Cam and Budget Cleats |
 |
Shackles, Sheaves, springs and V Bolts
Including Shackles, Sheaves, S Hooks and V Bolts. |
| |
|
|
|
 |
The Clamseal
The award-winning, patented ClamSeal™ - repairs inflatables fast - even when wet. |
 |
Fuel Whistle
A simple device to prevent accidental spillages whilst refuelling. |