Ball Bearing Complete Traveller Systems

for yachts up to 11m

Size 1 = yachts up to 8.5m

Control line 6mm max
Fastening size 5mm hex bolts
WIDTH = 57mm
SWL = 500kgs

Size 2 = yachts up to 11m


Control line 8mm max
Fastening size 6mm hex bolts
WIDTH = 70mm
SWL = 700kgs


2:1 Purchase incorporating 70 degree angle cleat on ends


  Yachts up to 8.5m Yachts up to 11m
Part No 20900 24900
Contents of kit
  • 1.4m sliding bolt track
  • Plastic end caps
  • Traveller End Fitting
  • Fitting Instructions
  • Pilot Track
  • 1.6m sliding bolt track
  • Plastic end caps
  • Traveller End Fitting
  • Fitting Instructions
  • Pilot Track

4:1 Purchase incorporating 70 degree angle cleat on ends


  Yachts up to 8.5m Yachts up to 11m
Part No 20901 24901
Contents of kit
  • 1.4m sliding bolt track
  • Plastic end caps
  • Traveller End Fitting
  • Fitting Instructions
  • Pilot Track
  • 1.6m sliding track
  • Plastic end caps
  • Traveller, End Fitting
  • Fitting Instructions
  • Pilot Track

4:1 Purchase incorporating cleats on traveller


  Yachts up to 8.5m Yachts up to 11m
Part No 20902 24902
Contents of kit
  • 1.4m sliding bolt track
  • Plastic end caps
  • Traveller End Fitting
  • Fitting Instructions
  • Pilot Track
  • 1.4m sliding bolt track
  • Plastic end caps
  • Traveller End Fitting
  • Fitting Instructions
  • Pilot Track

Sliding Bolt Track
Allows for a smooth clean profile with no visible fastenings.
Also makes retro-fitting an easier job as bolts can be slid along the extrusion to match existing fastening holes.
Ensure washers are fitted beneath track to ensure a secure seal.

FITTING INSTRUCTIONS:

Contact your nearest Barton distributor